Multiplaz 15000 is the most powerful air plasma cutter in the market, with an fastest cutting speed, the maximum cutting thickness is 50 mm. Free delivery to all countries.
By buying this product you can collect up to 230 reward points as a voucher of $46.00.
Your reward points.
| Dimension: 47.5*33*37cm ; G.W.: 35KG; Volume: 0.05CBM | ||||||||
| Specification | ||||||||
| Electrical supply | V | AC400V±10%(3 Phases) | ||||||
| Line frequency | HZ | 50 - 60 | ||||||
| Rated input current | A | 28,9 | ||||||
| Input capacity | KVA | 20 | ||||||
| No-load voltage | V | 270 | ||||||
| current range | A | 20-110 | ||||||
| Output voltage | v | 128 | ||||||
| Duty cycle imax (25℃) | 60 | |||||||
| Duty cycle 100%(25℃) | A | 85 | ||||||
| Efficiency | % | 85 | ||||||
| Power factor | % | 93 | ||||||
| Insulation class | B | |||||||
| Protection class | IP23 | |||||||
| ARC starting | No-contac arc-starting | |||||||
| Compressed Air (for Carbon steel) | Mpa | 0.4~0.6MPa; 7800L/h | ||||||
| Compressed Air (for Stainless steel) | Mpa | 0.4~0.6MPa; 1200L/h | ||||||
| Cutting thickness | mm | ≦35 | ||||||
| Application | ||||||||
| Advantage | ||||||||
| 1 | Easy to cut thick metals in a fast and economical way | |||||||
| 2 | Suitable for cutting stainless steel, copper, carbon steel and aluminum and other metals | |||||||
| 3 | Easy to operate, smooth cutting performance | |||||||
| Standard:1pc of 5m P80 plasma torch, 1 set of 300A Earth clamp+3m 16mm2 Cable+KDP-16A, 1 set of air regulator for CUT70/CUT100 | ||||||||
No customer comments for the moment.
Only registered user can post a new comment.
